Until the year 1995 in the market mixers were used with a traverse plane pick to the flow of entrance of air to the motor. This system presented an inconvenience technically without solution for the correct operation of the vehicles it opposed resistance to the flow of air, therefore it caused an effect of "fed" walking to naphtha and a defect of "filled" working to gas. Considering this serious problem and always thinking of the progress of our clean fuel, in the year 1996 the investigation department and development of ARGENGAS discovers and it develops a novel device that eliminates the pick dispenser inside the flow of air, allowing the step of this with more freedom getting after numerous tests excellent results. 1. Perfect homogeneity of the mixture in all the regimens, being able to diminish the emissions of polluting substances 2. Maximum use of the fuel - bigger economy 3. Maximum power when it is required 4. It annuls the effect of having fed working to naphtha 5. Filled maximum of the motor going to gas and naphtha
Technical information
The group this formed by two bodies united by their base. One tubular hole with a lip that is projected toward inside in the entrance and the other conical whose base minor is a circumference that opposes you to the lip of the tubular body leaving a groove for where it enters the gas to the flow of air. The two bodies form a camera that distributes the gas in homogeneous form for the perimeter. The device developed by ARGENGAS had been designed to give gas in form perimeter and traverse to the flow of air that enters to the motor, he/she means that the supply is made through a long ring surface of low pressure that surrounds it and that for its size it is sensitive to minimum variations in the revolutions of the motor. The design also provides what is denominated linealidad in the delivery that means better proportionality in the flow of incoming air and the fuel surrendered to any regime.
|
HOME
Electronics
